Frequently asked questions about business card printing.

Our Printing

free shipping

member login

How can I make sure my blues do not come out purple?

When using a blue in your design, always make sure to leave at least a 30% difference in your Cyan and Magenta values.

Blue is close to purple in the CMYK spectrum. Remember, use a low amount of magenta whenever using high amounts of cyan to avoid purple.

Example: C-100 M-70 Y-0 k-0

Can I submit multiple files in one document?

No. We are now specifically set up to process one side at a time, and this requires that each side of a job must be on a separate file.

Not separating files will cause delays and you might have to send the files again. Remember to separate the pages of your .pdf files as well.

What is overprint, and how can it ruin my file?

Primarily used to intentionally overlap inks for a number of reasons, overprint can cause unexpected results. We suggest that you turn all overprint objects off before submitting your files.

Unexpected results may occur if you have accidentally set certain objects to overprint. Always check logos and other artwork before submitting.

Should I send a proof or sample file?

When sending artwork, do not send extra files, like proofs or samples, because they might get printed. Only send the files you need printed.

We are not responsible for these kind of files being printed. Unless requested by one of our employees, DO NOT send files that you do not want printed.

How can I avoid transparency issues?

Any transparency issue can be resolved before saving your file.

To prevent this, never use shadows, glows, or any other transparency, image or otherwise, on top of a spot color. Always convert your spot color to CMYK and flatten before sending.

All of these effects will cause transparency problems.

How should I set up my file for proper rotation?

Do not send your files rotated if both sides read the same way.
When one side reads different than the other, you should align the file how you want them printed before you send the files.
For files not properly set up, we will use best judgment and will not be resposible for improper rotation.

Does QP accept borders on jobs?

Yes, but if the border is too close to the cutline, it may be cut off-center slightly.
We cut through many sheets at a time, so watch your borders to avoid an unwanted mistake.

How should I set up my bleed and crop marks?

Bleed must extend further than the cut line. Using our QP Templates can help visualize this. Please keep all text and anything you do not want cut at least .125" away from the cut line.
When sending an .eps or .pdf, make sure you include crop marks so we can cut the job correctly.

What resolution should my file be?

Low resolution files may be printed as is or will be placed on hold until we receive new files, slowing your turnaround.
We only accept 300 dpi files and no less.

What color mode should my files be?

If you send us an RGB file, there is a chance that a color shift may occur and you may not be satisfied with your job.

You should always start and finish your designs in CMYK color mode.

What type of files can I send to QP?

You may send .jpg, .jpeg, .psd, .tif, .tiff, .eps, .ai, .cdr, .pdf, and .png

	We recommend saving as a .PDF

PHOTOSHOP	ILLUSTRATOR	INDESIGN	QUARK
.PDF .PSD .JPG .TIF	.PDF .EPS .AI	.PDF .EPS	.PDF

We prefer that you send .PDF and .EPS files with outlined fonts. These files are easier to handle and will likely speed up your turnaround. Remember to add crop marks and flatten your files before uploading.